Email steeringclutch@gmail.com
for orders or
questions.
CONTACT OUR OFFICE at 1-208-342-8911
General Gear and Machine
733 Desert Wind Rd.
Boise, Idaho, 83716 US
JD450C STEERING
CLUTCHES
| The John Deere Model 450C's have oil type
steering clutches and use 8 Friction discs p/n T82355 composite paper faced discs on a
steel toothed base along with 8 steel separator plates p/n T31732. When later JD models
were developed they used bimetallic discs to replace the earlier style fiber discs. Some
owners prefer the earlier bimetallic friction discs. The bimetallic disc part number is
T44129. This was replaced by the paper faced friction discs T82355. Some
owners still prefer the Bimetallic discs so it is your choice. The same numbers of
discs were used in all circumstances. Most of the time you can get by with only changing
the friction discs. The steel separator plates can usually be re-used. Check them for
roughness, warping, or dishing and if they are clean, smooth, and straight, by all means
re-use them!
ORDERING INFO: All items below are in stock and if you would like to get any of them on the way just let us know! If you are in the US you may call 1-800-531-9021 or if you are outside the US, 1 208 342 8911. For orders/questions. email steeringclutch@gmail.com Our hours are Monday through Friday from 10 am Eastern Time to 6 pm Eastern Time (8 am Mtn Time to 4 pm Mtn Time). We are located 20 miles east of Boise, Idaho. FOR A WIDER SELECTION OF
ALL OF OUR DISCS MADE
also fits 450B, 450C, 450D, 450E
IDENTIFYING YOUR JD450-450B-450C You
will find different serial number locations on different models of the JD450 series of
crawlers. Below are some files showing you where to look for your serial number and
what they mean when you find them. |
||
email steeringclutch@gmail.com For orders or questions.
|
Free
shipping in US only, Priority Mail or UPS Ground, on orders $500 or higher.
