The John Deere Model 550A's have oil type
steering clutches and use 8 Friction discs p/n T82355 composite paper faced discs on a
steel toothed base along with 8 steel separator plates p/n T31732.
When later JD models were developed they used bimetallic discs to replace the earlier
style fiber discs. Some owners prefer the earlier bimetallic friction discs. The
bimetallic disc part number is T44129. This was replaced by the paper faced friction
discs T82355. Some owners still prefer the Bimetallic discs so it is your
choice. The same numbers of discs were used in all circumstances. Most of the time
you can get by with only changing the friction discs. The steel separator plates can
usually be re-used. Check them for roughness, warping, or dishing and if they are clean,
smooth, and straight, by all means re-use them!
Free shipping in US only, Priority Mail or UPS Ground, on orders
$500 or higher.
ORDERING INFO:
We
can usually ship on the same day any items we have in stock that do not have to be pulled
from a machine.
We are set up to offer the payment choices of either Visa, Master Card, or the PayPal
option (to the account of webmaster@tractorparts.com)
All items below are in stock and if you would
like to get any of them on the way just let us know! If you are in the US you may
call 1-800-531-9021 or if you are outside the US, 1 208 342 8911. You may alsoemail steeringclutch@gmail.com for orders/questions.
Our hours are Monday through Friday from 10 am
Eastern Time to 6 pm Eastern Time (8 am Mtn Time to 4 pm Mtn Time). We are located
20 miles east of Boise, Idaho.
FOR A WIDER SELECTION OF ALL OF
OUR DISCS MADE
FOR MANY OF THE JOHN DEERE MACHINES....CLICK HERE
T82355 Paper faced friction discs (8) required @
27.00 ea
T44129 bimetallic disc, new aftermarket, NOW $24.00 ea
T31732 steel separator plates,(8) required, $14.00
EA.
IF YOU DECIDE YOU NEED COMPLETE CLUTCH PACK...8
PAPERFACED FRICTION AND 8 STEEL..YOUR TOAL COST IS $328 PER SIDE
IF YOU DECIDE YOU NEED COMPLETE CLUTCH PACK...8
BIMETALLIC FRICTION AND 8 STEEL..YOUR TOAL COST IS $304 PER SIDE

T44129 BIMETALLIC FRICTION DISCS 24.00 EA Will work for dry type or oil type
cteering clutches
T82355 FRICTION DISCS, PAPER FACED.
Some users prefer the paper over the bimetallic
and some prefer bimetallic over paper faced discs. We provide both options. $27.00 EA
The T20717 steel separator plates(used in the
earlier JD450's) are often confused with the T31732 plates used in the later steering
clutches of the JD500's. To be sure which plates you have in your clutch the
thickness should be measured. The T20717 will measure closer to .087 while the later
T31732 discs will be closer to .097-.099. If the quantity of your discs varies from
what is normally required, it is usually caused by the mis-use of the wrong steel
separator plates.
T44805 SHUTTLE
CLUTCH FRICTION DISCS 15.00 EA
PEDAL RETURN SPRINGS T23861 NEW $16.00 EA
OR SET OF (2) @ 25.00
Also fits 450A,B,C's 550A,B,C's RELATED TRACK LOADERS 455'S , 555'S and more.
JD9326 STEERING CLUTCH PILOT BEARING $4.00 (ONE
USED PER CLUTCH)
BRAKE
BAND...AT142175 ONE PIECE BAND DESIGNED FOR OIL TYPE STEERING
CLUTCHES ......$185.00 ea plus UPS/FedEx shipping of $25.00 in the US. These will not ship via Priority Mail Flat Rate boxes but
for regular Priority Mail of $55.00 in the US.
AT142175 REPLACES BANDS AT40441, AT104901, and AT141619
Click HERE to view all of our new steering clutch
discs.
|